Bowser Castle 2: Difference between revisions

As with the other Bowser Castle tracks, Bowser Castle 2 is composed entirely of straightaways and 90° turns. There are also [[Thwomp]]s as obstacles, which remain airborne on the first lap. The course begins with a right turn followed by the only set of [[? Panel]]s. There is then a straightaway, where there are three jump pads on alternating sides of the track that allow racers to hop over the lava. There are also two pairs of Thwomps along the straightaway. Racers then take two right turns and reach a fork in the road; however, going left soon leads to a dead end. Racers then take two left turns, with a group of four Thwomps along the second turn, then there are two more forks in the road where racers must go either left or right around square holes in the road. On the left side of the second hole is another four Thwomps. Afterwards, racers take a right turn and reach another straightaway where there are many jump pads that allow racers to hop over the lava. The first part of this straightaway is split down the middle by a wall, and the middle of the straightaway has a group of three Thwomps. After this straightaway is a right turn with one last Thwomp, followed by a brief straight that takes racers to the finish line.